HOLDCHEM Equipment's for Paint Apply
HOLDCHEM Paint Equipments
High-Pressure Airless Sprayer: Model H1015
General Information
Application: Suitable for industrial applications like steel structures, ships, automobiles, and railway vehicles.
Key Features:
- Advanced technology minimizes "dead point" faults.
- Low energy consumption and noise reduction.
- Lightweight and compact compared to international counterparts.
Technical Specifications
| Parameter | Specification |
|---|---|
| Pressure Ratio | 34:1 |
| No-load Displacement | 5.6 L/min |
| Inlet Pressure | 0.3-0.6 MPa |
| Air Consumption | 180-2000 L/min |
| Stroke | 100 mm |
| Weight | 37 kg |
| Product Standard Code | Q/JBMJ24-97 |
Key Safety Instructions
- Operate only with trained personnel.
- Ensure all components are checked and tightened before use.
- Always wear protective gear such as gloves, glasses, and masks.
- Maintain proper grounding and avoid flammable environments.
Maintenance Guidelines
- Clean filters and strainers regularly.
- Lubricate pump rods and oil cups as per the schedule.
- Replace worn-out sealing rings and other parts promptly.
Common Faults and Troubleshooting
| Fault Phenomenon | Possible Cause | Suggested Solution |
|---|---|---|
| Insufficient reversing power | Low air intake | Check air pressure, compressor capacity |
| Coating pressure not sufficient | Abrasion of parts, blocked intake | Clean/replace faulty parts |
| Gas stream spraying continuously from parts | Damaged O-ring or misaligned components | Replace O-ring, check alignment |
Packing List
| Item | Quantity |
|---|---|
| Airless sprayer | 1 set |
| Rotating nozzle | 1 set |
| High-pressure hose (6mm x 10m) | 1 set |
| Hook spanners (55-62, 34-36) | 2 sets |
| Instruction manual | 1 copy |
| Product qualification certificate | 1 copy |
Rotating Nozzle Specifications
Example: "519" (5 = 250mm spray width; 19 = 0.19mm aperture)
Compatible with all airless sprayer models.